|
YOU'VE COME THIS FAR, DON'T MAKE A MISTAKE NOW!
WHY
SHOULD YOU BUY LENSRENEW AND NOT A COMPETITORS LESS EXPENSIVE
PLASTIC HEADLIGHT REPAIR PRODUCT?
HERE'S WHY:
You have probably studied your headlight lenses and covers from
different angles trying to figure out if the opaqueness, yellowing,
or haze was in the plastic or just on the surface. Perhaps you used
a fingernail to see if the haze or yellowing would scratch off? Finally,
you wondered if the damage was "inside" the covers or lens...
making any refinishing hopeless.
FACT:
SHORT OF CUTTING THE LENS
IN HALF AND VIEWING THE SECTION FROM THE SIDE,
THERE IS NO ACCURATE METHOD TO DETERMINE THE
EXTENT OF THE DAMAGE. |
 |
If after careful study you decided that the damage is
not "inside" and that your lenses are probably repairable,
you possess more than basic mechanical aptitude! Read on to see why LensRenew
and not a competing product makes perfect sense.
Others out there offer lens restoration kits that contain
either chemical solutions or compound/polish with a buffing wheel.
These will work on lenses with surface oxidation or other minor surface
damage. These kits cost less. They are basic and contain inexpensive
materials. HOWEVER, if the damage that caused your lenses to turn opaque,
yellow, or cloudy, be it oxidation or otherwise, has started to eat into
the face of the lens, these basic kits will generally NOT restore your
lenses and covers to clear.
LENSRENEW IS BASED ON COMMON SENSE AND
COVERS THE VAST MAJORITY OF ALL DEGREES AND TYPES OF DAMAGE.
LENSRENEW IS THE SAME PROCESS USED TO REPAIR THE CLEAR HEAD-SAVING
ACRYLIC AT ICE HOCKEY RINKS.
|
HERE'S THE WHY AND HOW:
It impossible to tell the whether the damage has eaten into the lens
face, so LensRenew removes the damaged lens face down to virgin plastic
with a super fast cutting abrasive. Then, starting with the virgin
lens face, the LensRenew process removes the very fine sanding swirls
you created with the first step and then restores the lens face back
to clear in under ten minutes.
BOTTOM LINE:
If you a buy a kit containing chemical solutions
or compound/polish with buffing wheel and the damage has started
to eat into the plastic lens face, you gambled and lost!!
WORTHY NOTE:
Another reason to buy LensRenew. The inventor,
Robert Hannan has a background in the plastics industry and as a
commercial pilot active in the aviation industry for twenty five
years he has extensive experience restoring aircraft windshields
using nearly every aircraft windshield restoration product on the
market. LensRenew has its roots in aviation and is a thoroughly tested
product, the materials are professional grade and the kit is simply,
no nonsense. |